Stator for Yamaha YFM 450 Kodiak 2018-2022
Dimensions:
Interior diameter: 54 mm
Exterior diameter: 115 mm
Thickness: 19 mm
Length of wires stator to grommet: 125 mm
Length of wires grommet to plug #1: 395 mm
Length of wires grommet to plug #2: 560 mm
Length of pickup coil's wire to grommet: 55 mm
Other specifications:
Number of wires: 5
Number of plugs: 2
Number of pins: 5
Number of poles: 18
Wire to wire resistance:
Alternator: White to White = 0.5 ohms +-20%
Pickup: Grey to Black = 507 ohms +-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
